(Continued from Part I)
After arriving around midnight at the campsite, we set up the basics, and got to bed. My wife and I ran into a bit of a problem with our bed situation, as the air mattress we had been using had developed a leak that I couldn’t patch, and the replacement we brought was a king-sized one that wouldn’t fit in the back area. Luckily, with just the three of us in the bus, we could share the bottom bunk, while our son took the top bunk.
We had a nice site near the top of the hill on our loop. For the Red House camping area, the A loop and B loop had their own bathroom facilities, while the C and D shared a bathroom, I think with the E loop. There were abundant water taps, and fairly nice stone rings for firepits, though no grates. We realized that we’d been spoiled, as the fire pits and rings at Sprague Brook and Evangola had attached and adjustable grates to cook on.
Luckily, the camp store was literally down the hill and across the road from our site, and they had a nice round grating that I could perch on stones in our firepit and make a cooking surface. They also sold a 30amp to 15amp plug adapter, which I found I needed, as the 15amp power plug on the power tree was a GFCI outlet that kept tripping when I plugged into it (which of course was happening after midnight in the light rain.)
I was totally perplexed as to what was tripping the outlet, as the system worked fine on my garage’s 15amp breaker, so after going through everything and eventually unplugging a number of non-essential systems including the plug from the inverter (even though the breaker for the inverter’s power feed was off), I finally got us basic power for lights and the fridge. After spending part of the morning tearing apart the main power in plug and the breaker box, I found that it seemed that the GFCI was being tripped by the ground of the plug of the inverter.
As the ‘main’ of the box is just a regular breaker, I had wired in the plug end of a 12 gauge extension cord into an unused breaker in the box, with the understanding that in order to power the system with the inverter, I would first turn off the main, then turn on the inverter breaker, and to go back to land power, the inverter breaker would go off first, then the main would go on. But as the inverter was set to take a grounded plug, but only connected to the 12VDC positive and negative, it seemed that the GFCI ‘saw’ the system with a return/ground fault in the 110AC system. Once I put the adapter in and plugged into the 30amp outlet, there was no issue, and all worked the way it was supposed to.
We finally got to use the stove, and it preformed admirably. While most of our cooking was done over the wood fire, the burners of the stove did a nice job with popcorn, and the oven did a great job with flatbread pizzas (and a 12” round fits easily). However, I’ve found that I need some small receptacle for spent matches, though I’m realizing that all those ashtrays that have fallen into disuse should provide for something both suitable and attractive.
The troubleshooting/improving never stops …
(More on the park in Part III)
I use a small canning jar for the few spent matches I use. I also keep Gorilla 5 min Epoxy on hand for repairing my air mattress.
Oh! Thanks for the tip on the epoxy. I’ll have to try that. 🙂